Enchedora saco válvula

A valve bag filling machine fills bags through a small valve opening in one corner or end of a pre-made bag, rather than through the open top. The bag is pre-sealed on all sides except the valve opening; after filling the valve is compressed or heat-sealed shut. This design gives a very clean, dust-free exterior because the bag is never fully opened during filling. Valve bag fillers are the industry standard for cement, gypsum, plaster, lime, fly ash and other fine, dusty powders. Speeds of 200–1,200 bags/hr are achievable depending on powder flowability and bag weight.

Impeller valve bag filler: uses a rotating impeller inside the fill tube to force dense, non-aerated powder (dry cement, sand, granules) through the valve. Higher fill speed, less sensitive to density variation. Best for heavy-duty cement, gypsum and sand applications. Fluidising (air-activated) valve bag filler: uses compressed air injected into the hopper and fill tube to aerate and fluidise the powder, which then flows rapidly under gravity pressure. Better for cohesive, fine powders that would bridge or block an impeller (fly ash, lime, fine calcium carbonate). Slightly lower fill speed, very consistent fill weight. For most cement and gypsum applications, the impeller type is preferred.

Yes. For powders classified as explosive dust (sugar, starch, flour, grain, plastic pellets, aluminium powder), an ATEX-rated valve bag filling machine is required in many markets (EU ATEX Directive 94/9/EC, NFPA 652 in the US). ATEX-rated features include: certified explosion-proof electrical components; earthing/grounding straps on all rotating parts and bags; inert gas purge option; conductive or anti-static bag specifications; and spark-proof impeller materials. All HEMUfill valve bag machines can be specified with ATEX Zone 21 or Zone 22 certification on request.

Compatible valve bag types: PE (polyethylene) valve bags — most common for cement; valve is heat-sealed after filling. PP woven valve bags — high-strength for heavy materials; valve is self-sealing due to product pressure. Paper (multi-wall kraft) valve bags — standard for fertilizer, chemical, food-grade products; pinch valve or adhesive seal. Aluminium foil laminate valve bags — for moisture-sensitive or high-value products. All bag types require a standard valve opening size (typically 50–80mm diameter). Custom fill spout adapters are available for non-standard valve sizes.

Dust control is critical for cement and chemical powder filling. HEMUfill valve bag fillers include: a sealed fill spout that engages directly with the bag valve, preventing powder escape during filling; a dust extraction collar and connected fabric filter or cyclone separator to capture displaced air from the bag during filling; an enclosed fill station with negative pressure to contain fugitive dust; and for highly dusty materials (fly ash, fine silica), a double-sleeve spout with independent dust extraction on both the inner fill path and outer bag contact. Regular filter cleaning and filter media selection are key to long-term dust control performance.

A manual-placement single-spout valve bag filler (20–50kg bags, 200–600 bags/hr): from $20,000–$50,000 USD. Automatic bag placer + single fill station: $50,000–$100,000 USD. High-speed rotary valve bag filling carousel (4–8 stations, 800–1,200 bags/hr): $150,000–$300,000 USD. Add $20,000–$50,000 for ATEX certification, $30,000–$80,000 for checkweigher and conveyor system. Contact us with your powder type, target bags/hr and bag weight range for a project-specific quotation.